loading
reading
writing
saving
searching
Onefinity Elite Woodworker w/accessories - $3,200
QR Code Link to This Post
https://youtube.com/shorts/HBWZPp0mPNs?si=YGbu9MrBBaj4ISwS
Willing to trade for items of equal or greater value. I need a new embroidery machine! I'm also willing to sell some of this separately so, if you want something let me know.
https://www.onefinitycnc.com/product-page/gen1eliteseries
It's super easy to make money with this machine. I baby this thing and keep up on the maintenance, even when not in use. There's less than 300 hours of work time and I am the original owner. I've switched to embroidery and selling this machine is a very hard decision. I've changed my mind before, buy it fast because I might change my mind again. Super easy transport as it's on wheels.
It's laser and drag knife compatible!!!! Check out onefinity.com for all of the accessories they offer and other brands can work too.
Designed for the more advanced user. With "anti-skip" closed loop steppers motors, Z-20 Heavy duty Z-slider, and advanced Masso Touch CNC Controller with integrated 15" touch screen all standard, the Elite series is for the serious CNC enthusiast. With a long list of features and upgrade options, the Elite series is for customers that want to get the most advanced functions and accessories while maintaining exceptional rigidity, precision and speed. If you have a business and need to keep output consistent with reduced cutting times the Elite Series is for you.
------------------------------
Elite Series Woodworker Package Includes:
Onefinity Elite Gen 1 CNC
Z-20 Z slider with 165mm travel, 65 mm mount
Masso Touch Controller w/ built in 15” Touch Screen (Advanced Version)
Closed Loop 1.2nm Stepper Motors on X and Y axis
Closed Loop 1.2nm Stepper Motor on Z axis preinstalled
Plug and Play wiring harness
1616 Ball Screw on X axis (Travel Per Revolution is 16mm)
1610 Ball Screw on Y & B axis (Travel Per Revolution is 10mm)
1610 Ball Screw on Z axis (Travel Per Revolution is 10mm)
Drag Chains on X and Y axis
Four (4) Infrared Homing Sensors (Z axis sensor preinstalled).
Woodworker Cutting Area: 32 1/8""(X) x 32 1/8"(Y) x 5 1/4"(Z)
Lifetime technical support with North America agents
------------------------------
Onefinity Elite Series features:
Advanced, custom designed, Onefinity MASSO Touch controller
Massive 15-inch high-definition industrial capacitive touch LED screen
Rigid, high precision, hardened steel, linear motion Shafts
High speed, long travel, Z-20 heavy duty Z-Slider
Powerful “anti-skip,” closed loop stepper motors
Infrared homing sensors with auto squaring
Fast travel, precision ball screws on all axis
Conveniently located Emergency Stop
Plug and Play wiring supported by drag chains
Wi-Fi enabled (Masso Link)
Built in Auto on/off Router outlet for use with Makita router
Built in Auto on/off Vacuum outlet (10amp)
Power Loss Recovery
Jump to Line
Continuous and incremental jogging via touch screen
Feed Rate Override - Adjust feed rate during a carve
Multiple Work offsets (G54-G59)
Micro Tramming
Open ended front to back allowing for 'tiling' (carving pieces longer than the cutting area)
User friendly design
4th Axis Rotary Plug & Play Support
Rapids at 600IPM
Spindle connection with on board controls
Each unit fully production tested with a test carve to ensure proper functionality and quality
A large “how to” library with a very helpful, active, and supportive community
And much more…
My set up has the extra stiffy bar but is unused.
Take your Onefinity to another level with the simple to install, beefy X-50 Stiffy. Although the Onefinity models are very rigid, when using an 80mm Spindle with large bits the X-50 Stiffy is a great add-on to add the extra rigidity.
X-50 Stiffy features:
50mm Hollow Linear Rail Shaft for maximum rigidity
High Load Linear Roller Bearing
Precision machined Aluminum Gantry Block and Rail Ends
Engineered to be rigid
Simple installation
Bits:
"Jenny" Infinite Possibilities set comes with 1 (One) "Jenny Bit", 1 (One) "Mini Jenny" and 1 (One) "Skinny Jenny". I never used these bits because I wanted to learn on cheaper ones first.
Diamond drag bits - I used the 90 degree once!
46" x 46" heavy-duty stand can be used for any number of uses in your shop. The size is excellent for use as an assembly table for cabinets, and the height adjustability (adjustable from approximately 22-1/4” - 43-3/4”) works in your favor for just that use. The stand has adjustable feet, and with Double-Locking Caster Set.
I own the newest version of Vcarve pro and that's an additional $550 of interested in buying it. That's over $100 in savings vs. buying from Vectric.
Includes the Makita router, extra bits, other accessories and the vacuum with an extra long hose.