New install of vista business with a COA and recovery disk
DVD Burner
Radeon x2400 pro 256 meg video - supports dual monitors
Office 2007
Adobe CS3 master collection
Nero
Avast antivirus
Whole set up $340
Tower only $280
808-6708
]]>
]]>With Plug-&-Play functionality, the D-Link DES-1024D Unmanaged switch expands your network and automatically detects your network speeds and adjusts for peak performance.
The 24-port D-Link DES-1024D unmanaged switch is the latest addition to D-Link’s popular line of Express EtherNetwork™ products. Like other products in the line, the DES-1024D combines ease of use with unsurpassed performance resulting in an exceptional value for any cost-conscious network administrator who wants the best possible solution at the best possible price.
The DES-1024D is truly Plug-&-Play with features like: Auto Speed Sensing — allowing it to automatically sense whether a network device is running at 10Mbps or 100Mbps then automatically adjusting itself for optimal performance; Auto-Negotiation (Full or Half Duplex) — negotiating and running the highest supported transmission rate whether at Half- or Full-Duplex; and Auto MDI/MDIX Crossover—offering auto-negotiating MDI/MDIX detection on every port to eliminate the need for crossover cables or uplink ports.
The DES-1024D features a non-blocking wire-speed architecture with a 4.8Gbps switching capacity, for maximum data throughput. It also features an integrated universal power supply, and per port diagnostics LEDs that make it easy to “spot check” for problems. With wire-speed filtering and Store-and-Forward switching, the DES-1024D also maximizes network performance while minimizing the propagation of bad network packets. This easy-to-use 10/100BASE-T swich will enhance and compliment any existing network infrastructure and deliver the performance that IT managers and other SMB network administrators demand.
Ports 24-10/100Mbps RJ-45 Auto-sensing ports Standards • IEEE 802.3 Ethernet • IEEE 802.3u Fast Ethernet • IEEE 802.3x Flow Control • IEEE 802.1p QoS Support (2 Queues) Network Interface • RJ-45: 100ohm, UTP/STP cable • 10/100Base – EIA/TIA Categories 3 or 5 cable Switching Method Store – and – forward Switch Fabric 4.8Gbps MAC Address Table 8,000 entries Filtering/ Forwarding/LearningRates Full line rate/full wire speed Physical Specifications • Dimensions (W x H x D):11.02 x 7.09 x 1.73 in.(280 x 180 x 44 mm) • Weight: 4.19 lbs. (1.9 kg.) • Metal Housing • Side Air Vents with Fanless Air-Cooling Design LEDs • 100Mbps – one per port • 10Mbps – one per port • Power • Link/Act (activity) Temperature • Operating: 32°-104°F (0-40°C) • Storage: 14°-158°F (-10°-70°C) Humidity, non-condensing • Operating: 5% to 90% RH • Storage: 5% to 90% RH Power Requirements Universal AC input: 100 to 240 VAC, 50 to 60 Hz, Internal Universal Power Supply EMC/ Safety Compliances Emissions • CE Mark Class A • FCC Class A • VCCI-A Safety • UL
Limited 5 Year Warranty for as long as the original customer/end user owns the product, (excluding power supplies and fans). Power supplies and fans carry a limited 3 Year Warranty]]>
]]>Four of them are part number: T533RB1G
Two of them are part number: T533RA1G4 ]]>
Features/Specifications:
SiI0680A UDMA/133 IDE Raid Controller PCI Card • General Features: • Silicon Image SiL0680A chipset • PCI interface • Compliant with UDMA ATA/133 specification • Supports maximum data transfer rate of 133 MB/s • Plug and Play • Connect up to four (4) IDE devices • Supports RAID functions 0,1, and 0+1 • Supports co-exist RAID set and Non-RAID HDD • Regulatory Approvals: • CE
Package Includes:
SiI0680A UDMA/133 IDE Raid Controller PCI Card • Drivers and Utilities CD • ATA/133 (80-wire/40-pin) IDE cable • User Manual
Additional Information:
Windows 98/98SE/Me/NT 4.0/2000/XP • Available PCI slot • CD-ROM drive • UDMA/133 Drive (Matching drives needed for RAID) • Notes: • Box style may vary ]]>
Model: Syba Agere FW343 3+1 Port PCI Firewire 1394a Controller Card w/ Cable
General Features:
Agere FW343 chipset - PCI card interface - Three 6-pin IEEE 1394 External Firewire ports - One 6-pin IEEE 1394 Internal Firewire port - Data Transfer Rate: 100, 200, and 400 Mbps - Plug and Play - Fully interoperable with IEEE 1394 devices - Supports descriptor based isochronous and asynchronous DMA engines
Port Descriptions:
Three external Firewire IEEE 1394A - One internal Firewire IEEE 1394A
Retail Package Includes:
Syba SD-LUC-4F IEEE 1394A PCI Host Controller - Firewire 6-pin to 4-pin Cable - ULEAD Video Studio Software - Retail Box - User's Manual / Installation Sheet ]]>
• CD tutorial, SPID wizard, Web configurator simplify setup • Creates an instant LAN for sharing a printer, fax machine, ISDN access • Enables dial-in hosting, remote LAN, individual dial-in/dial-out access • Supports simultaneous access to two ISPs, simultaneous voice and data calls • Built-in DHCP/DNS server makes it easy to add addresses • Support for Intelligent NAT, PPTP VPN, and other security protocols • Fast transmissions: 64 or 128 Kbps; 256 Kbps with compression • Supports call waiting, forwarding, conferencing; caller ID • Number of computers for ISDN service: Up to 4; up to 25 with additional hubs • Voice ports: 2 telephone line ports (RJ-11 connectors) • Interface/WAN: ISDN BRI-U port (RJ-45 connector) • Interfaces/local: 4 10BASE-T Ethernet ports (RJ-45 connectors) • Operating system requirements/Ethernet ports: Computer with 10BASE-T network interface card and TCP/IP protocol suite • Minimum requirements/modem: Computer with 10BASE-T port, and compatible ISDN service from a local service provider • Minimum requirements/included software: Windows 2000/98/95/NT 4.0 PC with a CD-ROM drive • Protocols supported: TCP/IP, PPP, Multilink PPP, ISDN Caller ID, DHCP, DNS, PAP/CHAP/MS-CHAP, Intelligent NAT, PPTP • Speeds: 64 Kbps on each ISDN B channel; 128 Kbps using Multilink PPP; effective speeds greater than 256 Kbps with data compression (Stac or CCP) • Management: HTML-based installation, configuration, and management using a standard Web browser • Height: 4 cm (1.6 in) • Width: 22 cm (8.7 in) • Depth: 13.8 cm (5.5 in) ]]>
 | ||||||
 | ||||||
| ||||||
 |
 | ||
 |
Integrated with 64MB Hynix DDR memory
Supports Microsoft DirectX7.0 above and OpenGL
Support AGP Universal Bus 4X/2X
Supports 3D resolutions (32-bit color) up to 1920x1200
Supports 32-bit 2D resolutions up to 2048x1536
Support ATI HYPER Z and HYDRAVISION technology ]]>
Wrap - Cord winds into base every time. No unreliable moving parts.
Snap - USB plug snaps securely into place. Protects the optical lens.
Pack - Compact, tidy mouse fits anywhere. No unraveling, no tangled mess. ]]>
Socket
This motherboard features a Socket 775 design. The Zero Insertion Force (ZIF) style socket makes it easy to install and upgrade your processor.
Chipset
The P4M800M7A motherboard is based on the Via P4M800 Northbridge chipset and the Via VT8237 Southbridge chipset. It supports Intel Pentium 4 LGA 775 (Dual Core Supported) and Celeron D Processors, with Hyper-Threading Technology and 333/400MHz Front Side Bus support.
Memory Expansion
The P4M800M7A provides 2 DIMM sockets using 184-pin DDR with a total capacity of up to 2GB. You can install DDR 333/400MHz Memory.
AGP Support
The P4M800M7A provides one 8X AGP slot. AGP 8x (AGP 3.0) the new generation VGA interface specification, this platform delivers enhanced graphics performance with high bandwidth speed up to 2.12GB/s. Allowing users to have a more realistic graphics experiences while gaming or movie watching.
IDE
The P4M800M7A includes built in IDE facilities that supports Ultra DMA 33/66/100.
Audio
The P4M800M7A comes with a Realtek ALC655 audio codec which supports high quality 6-channel audio.
Serial ATA Support
The P4M800M7A supports the Serial ATA technology through the Serial ATA interfaces. The SATA specification allows for thinner, more flexible cables with lower pin count, reduced voltage requirement, and up to 150 MB/s data transfer rate.
Biostar provides a 1 year warranty from the date of purchase and I can provide a receipt from the day you purchase it from me. ]]>
